4
14.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
20. The device is not designed to work with external schedulers or separate remote control
system.
24.Open device by holding the handle. Before that, release the buckle (3).
19. Do not place products made of cardboard, paper, plastic materials or other flammable
or meltable objects in the device.
22.The power cord may not be placed above the device and it may not touch or be located
near hot surfaces. Do not place the device under a mains socket.
17. This electrical appliance contains a heating function. Surfaces, also different than the
functional surfaces, can develop high temperatures. The equipment shall be touch only at
intended handles and gripping surfaces, and use heat protection like gloves or similar.
18. The device must cool down before you store it.
15. Accessible surface temperatures can be high when the appliance is operating.
Never touch the hot surfaces of the appliance.
21.Do not insert food portions that use whole oven volume, as it may cause fire and
destruction of the device.
23. Do not move or carry the device during operation. After the operation it can be moved
only if it had enough time for cooling down.
DESCRIPTION OF DEVICE
1. lid 2. power indicator / ready indicator 3. buckle
16. Due to the high temperature you should be careful when removing the prepared
dishes, removing hot grease or other hot liquids. Be careful, there can be hot steam
presence during use of the appliance.
During or after use, please do not touch the baking tray or the hot area on the shell before
the temperature goes down.
USING DEVICE
2. Wipe hotplates first with wet and next with dry cloth.
1. Connect the closed device to the socket with grounding - power indicator lamp will light (2).
3. Fully open the device. Place the previously prepared product on the bottom hotplate .
3. Apply a bit of edible oil or other plant fat to the trays, close and plug in, the power indicator lamp will light (2).
1. Remove all cartons and labels from housing and from inside (between hotplates).
4. Close the device. Snap the buckle (3). Do not close the lid (1) by force.
5. Clean unit according chapter “Cleaning ”.
2. Wait about 10 minutes. After this time device should reach required temperature - ready indicator lamp will off (2).
Prepare needed products.
5. During operation the ready indicator lamp (2) will be turning on and off, that’s mean that thermostat keep appropriate temperature of
the hotplates.
BEFORE FIRST USE
4. Keep the appliance running for few minutes to get ride of manufacturing odour. Device could emit some smoke during this time.
That’s normal.
ATTENTION! Do not use metal utensils or sharp kitchen tools because they can damage the special non-stick coating heating plates.
7. Fully open the lid (1) and remove the finished products using only wooden or plastic spatula.
6. Operation time is approximately 1 to 2 minutes and depends on type of used ingredients and taste preference.
CAUTION: During operation from the cover of the device there can emit hot steam.
Pievienoties sarunai par šo produktu
Šeit varat dalīties savās domās par Camry CR 3064 Kontaktgrils. Ja jums ir jautājumi, vispirms rūpīgi izlasiet rokasgrāmatu. Rokasgrāmatu var pieprasīt, izmantojot mūsu saziņas veidlapu.