Rokasgrāmata Nutool NAG230 Leņķa slīpmašīna

Rokasgrāmata

14

GB

COMPONENTS AND CONTROLS (PIC. 1) OPERATING INSTRUCTIONS

ANGLE GRINDER CONTROLS (PICS. 2 & 3)

Looking at the Angle Grinder from the top the spindle lock

is located at the front centre of the gearbox casing (Pic.2).

Thelocationpointsforthehandle(tosuitleftorrighthanded

operators)arelocatedeachsideofthegreygearboxhousing

at the front of the Angle Grinder. A direction arrow to show

the direction of disc rotation is located at the front of the grey

gearboxhousing.TheOn/Offswitchislocatedunderneaththe

rearhandgrip.TurntheAngleGrinderontoitsbackandlocate

theadjustablediscguard(Pic.3).Thedrivespindlecanbeseen

along with the disc locking nut and the backing disc washer

(Refertoinstallationofthediscs).

FITTING THE DISC GUARD (PIC. 4)

NOTE: ThediscguardmustbefittedtotheAngleGrinderatall

timesduringuse.

Locate the disc guard onto the guard mounting spigot and

SPECIFIC SAFETY INSTRUCTIONS

Warning!

This angle grinder has not to be used for cutting operations.

Pre-fitted disc guard is for grinding use only. If the user needs

to apply it for cutting, the separated cutting guard has to be

purchased.

The protection guard for cutting off is not included as

standard delivery.

SAFETY WARNINGS SPECIFIC FOR GRINDING

OPERATION

a) Useonlywheeltypesthatarerecommendedforyourpowertool

andthespecificguarddesignedfortheselectedwheel.

b) The guard must be securely attached to the power tool and

positioned for maximum safety, so the least amount of wheel is

exposedtowardstheoperator.

c) Wheelsmustbeusedonlyforrecommendedapplications.

d) Alwaysuseundamagedwheelflangesthatareofcorrectsizeand

shapeforyourselectedwheel.

e) Donotuseworndownwheelsfromlargerpowertools.

SAFE USE OF ANGLE GRINDER’S GRINDING DISCS

Warning! Under no circumstances should any type of diamond

coateddiscbeusedforgrindingmetals.

Grinding discs are breakable and should be handled with the

utmostcare.Theuseofdamaged,incorrectlymountedorworn

grindingdiscsisdangerousandcancauseseriousinjury.

Grinding discs should be handled and transported with care

grinding discs should be stored in such a way as to prevent

mechanical damage and contamination with substances that

couldcausedeteriorationofthebondingmaterial.

The information on the grinding discs relating to restriction

of use, safety indications or any other information should be

followed. In case of  doubt concerning the  correct selection

of grinding discs the user should request information from the

manufacturerorsupplier.

Before mounting and before each use the grinding disc should

be visually inspected for any cracks, chips, excessive wear,

contamination or any other damage that could affect safe

operation.

The grinding disc should be mounted in accordance with the

instructionsintheproductmanual.Aftermountingthegrinding

disc should be run for a reasonable time, if any unusual noise

or excessive vibration is evident the machine must be stopped

immediatelyandthecauseinvestigated.

Allguardsmustbecorrectlyandsecurelyfittedandpositioned

correctly.Theanglegrindermustnotbeusedwithouttheguard

fitted.

Personal protective equipment suitable for the work being

carried out should be worn. Personal protective equipment

should include, suitable work gloves, ear protection, eye

protection, respiratory protection and steel toe cap shoes or

boots.

Only use grinding disc suitable for the work being done and

observeallsafetyinstructionsandrestrictionsofuse.Useofthe

wrongtypeofgrindingdisccouldresultinseriousinjury.

Whenusingagrindingdisctheanglebetweenthegrindingdisc

andworkpieceshouldbebetween30°and40°.

Before placing the angle grinder on the workbench or floor it

must be switched off and the grinding disc must have stopped

rotating.

Anglegrindersmustnotbeusedaboveshoulderheight.

Grinding discs must not be run at a rotational speed greater

thanthatshownonthegrindingdisc.

Grinding discs must be used dry. Using water is highly

dangerousandcouldresultinanelectricshock.

Do not use discs that are larger than specified, only use discs

thatareratedfortheanglegrinder.

Therotationalspeed(RPM)shownonthediscshouldalwaysbe

HIGHERthantherotationalspeed(RPM)oftheanglegrinder.

1

Anglegrinder

2

Spindle lock

3

Backing washer

4

Disc clamping nut

5

Guard

6

LH&RHhandlepoints

7

On/Off

8

Handle

9

Wrench

Downloaded from www.Manualslib.com manuals search engine

Vērtējums

Vairāk par šo rokasgrāmatu

Mēs saprotam, ka ir patīkami, ka jūsu Nutool NAG230 Leņķa slīpmašīna ir papīra rokasgrāmata. Jūs vienmēr varat lejupielādēt rokasgrāmatu no mūsu vietnes un pats to izdrukāt. Ja vēlaties saņemt oriģinālo rokasgrāmatu, iesakām sazināties ar Nutool. Viņi varētu nodrošināt oriģinālu rokasgrāmatu. Vai meklējat sava Nutool NAG230 Leņķa slīpmašīna rokasgrāmatu citā valodā? Izvēlieties vēlamo valodu mūsu mājaslapā un meklējiet modeļa numuru, lai redzētu, vai tas ir pieejams.

Specifikācijas

Visas rokasgrāmatas par Nutool Leņķa slīpmašīnas
Citas Leņķa slīpmašīnas rokasgrāmatas

Bieži uzdotie jautājumi par Nutool NAG230 Leņķa slīpmašīna

Mūsu atbalsta komanda meklē noderīgu informāciju par produktu un atbild uz bieži uzdotajiem jautājumiem. Ja atrodat ko nepareizu bieži uzdotajos jautājumos, informējiet mūs, izmantojot saziņas veidlapu.

Saistītie produkti

Rokasgrāmata

Bosch GWX 18V-10 PC Leņķa slīpmašīna

Rokasgrāmata

Bosch GWS 26-230 JH Professional Leņķa slīpmašīna

Rokasgrāmata

Bosch PWS 2000-230 JE Leņķa slīpmašīna

Rokasgrāmata

Einhell TC-AG 115/750 Leņķa slīpmašīna

Rokasgrāmata

Skil 3930 CA Leņķa slīpmašīna

Rokasgrāmata

Bosch GWX 18V-10 SC Leņķa slīpmašīna

Rokasgrāmata

Bosch GWX 18V-15 SC Leņķa slīpmašīna

Rokasgrāmata

Bosch GWX 18V-10 PSC Leņķa slīpmašīna

Saistītās kategorijas