Rokasgrāmata Wood's WDD80 Mitruma regulators

Rokasgrāmata

4

Thank you

Thank you for choosing a Wood’s

dehumidier. You are one of more

than 300.000 people who have cho-

sen a Wood’s dehumidier to prevent

damages from excessive moisture

and mould. Originating in Canada

in 1950, Wood’s has more than 60

years experience of developing and

manufacturing dehumidiers. When

choosing a Wood’s dehumidier

you’ll get a unit with great quality,

high capacity and that will extract the

most litres per consumed kWh.

Wood’s WDD80

Wood’s WDD80 is a convenient and

efcient portable adsorption dehu-

midier. It is suitable for basements,

washing rooms, summer houses and

other areas that need dehumidifying.

Workings of your

dehumidier

Wood’s WDD80 is a adsorption de-

humidier. The adsorption technique

allows for use in colder areas, with

great capacity.

As the dehumidier works, warm and

dry air is exhausted on the top of the

unit. This makes the WDD80 ideal for

drying washing, clothes, wood etc.

1. Security warnings

Please read these security

warnings before using the unit:

1. Unplug the unit from its power

supply before cleaning, storage or

maintenance of its lter.

2. Always keep a safe distance from

water sources.

3. Do not let the machine near heat

equipment or inammable or dang-

erous goods

4. Do not put ngers or other

objects into air inlet or air outlet.

5. Do not stand on the machine.

6. Always drain the water

according to the instructions.

7. If the power cable is damaged, it

must be replaced by qualied

personnel.

8. The appliance is for indoor use

only and should not be used in

bathrooms and shower areas.

2. Installation and

placement

Wood’s dehumidiers are easy to

move around, but bare in mind the

following.

• The dehumidier should not be

placed near radiators or other

heat sources or exposed to direct

sunlight, as it will reduce its perfor-

mance.

• Keep at least 25cm distance from

walls and other obstructions to

maximize the air ow.

• For optimum performance, place

the dehumidier in the middle of

the room.

• Make sure that the air ow from the

inlet and outlet isn’t blocked

Installation:

1. Place the dehumidier on a at

and solid ground, preferably in the

middle of the room.

2. Close all windows and ventilators

in the room to prevent moist outside

air from owing into the room.

3. Connect the dehumidier to a

grounded power outlet.

3. Using the WDD80

Hygrostat controlled

The unit will run only when the

ambient humidity exceeds your set

value.

Automatic restart

In the event of a power failure, the

unit will continue to work according to

your latest settings once the power

returns.

A. Operating instructions

1.Starting the dehumidier

Press the POWER key to start and

stop the unit.

2. Set humidity

The unit has 4 available settings for

desired humidity; 40%, 50%, 60%

and ”continuous”. In continuous

mode, the unit will continue to run

despite ambient humidity level being

reached.

The humidity can only be set

on low and medium fan speed.

On high fan speed, the unit will

run continuously.

3. Set fan speed

The WDD80 has 3 fan speeds; low,

medium and high. Press the SPEED

key to choose fan speed.

4. Set timer

Press the TIMER key to set timer for

automatic shut off. Choose between

1, 2, 4 or 8 hours.

5. Air angle

Press the AIR ANGLE key to turn the

air exhaust 45°, for example when

drying clothes or washing.

6. Ionizer

Press the ION key to activate the io-

nizer. The ionizer cleans the air from

harmful particles at the same time as

the unit dehumidies.

NOTE: After shut off, the fan con-

tinues to run for a few minutes to

prevent mould from forming inside

the unit.

4.Water drainage

The water is collected in the water

bucket on the back of the unit. When

the water bucket is full, the unit auto-

matically shuts off. An alarm sounds

and a light illuminates on the control

panel. Remove the water bucket to

empty it and reinsert it.

Attach the water hose

Attach the included water hose to the

unit and to lead the water directly to

a drain - this way you don’t have to

empty the water bucket.

Connect the included hose on the

back of the dehumidier. Lead the

other end to a drain. Make sure that

the water can be drained downwards.

English

Vērtējums

Vairāk par šo rokasgrāmatu

Mēs saprotam, ka ir patīkami, ka jūsu Wood's WDD80 Mitruma regulators ir papīra rokasgrāmata. Jūs vienmēr varat lejupielādēt rokasgrāmatu no mūsu vietnes un pats to izdrukāt. Ja vēlaties saņemt oriģinālo rokasgrāmatu, iesakām sazināties ar Woods. Viņi varētu nodrošināt oriģinālu rokasgrāmatu. Vai meklējat sava Wood's WDD80 Mitruma regulators rokasgrāmatu citā valodā? Izvēlieties vēlamo valodu mūsu mājaslapā un meklējiet modeļa numuru, lai redzētu, vai tas ir pieejams.

Specifikācijas

Visas rokasgrāmatas par Wood's Mitruma regulatori
Citas Mitruma regulatori rokasgrāmatas

Bieži uzdotie jautājumi par Wood's WDD80 Mitruma regulators

Mūsu atbalsta komanda meklē noderīgu informāciju par produktu un atbild uz bieži uzdotajiem jautājumiem. Ja atrodat ko nepareizu bieži uzdotajos jautājumos, informējiet mūs, izmantojot saziņas veidlapu.

Saistītie produkti

Rokasgrāmata

Wood's M10G Mitruma regulators

Rokasgrāmata

Wood's SW38FX Mitruma regulators

Rokasgrāmata

Wood's SW38FX SILENT Mitruma regulators

Rokasgrāmata

Wood's SW59FX SILENT Mitruma regulators

Rokasgrāmata

Wood's LD40Pro Mitruma regulators

Rokasgrāmata

Wood's MRD20 Mitruma regulators

Rokasgrāmata

Wood's MDK26 Mitruma regulators

Rokasgrāmata

Wood's LD24 Mitruma regulators

Saistītās kategorijas