Rokasgrāmata FERM PDM1052 Triecienurbis

Rokasgrāmata

5

EN

• Make sure that the maximum speed for the

accessory is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Before use, remove all nails and other metal

objects from the workpiece.

• Make sure that the workpiece is properly

supported or fixed.

• Keep your hands away from the workpiece

during use.

• Never put the machine down on a table or a

workbench before it has been switched off.

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm

2

. If you use a

extension cable reel, always fully unroll the

cable.

Technical specifications

Mains voltage 230 V~

Mains frequency 50 Hz

Power input 800 W

No-load speed 0 - 3.000 /min

Impact rate 0 - 48.000 /min

Protection class IP 20

Weight 2.2 kg

Max. drill diameter

Wood 25 mm

Concrete 13 mm

Steel 10 mm

Noise values

Sound pressure (L

PA

) 91.7 dB(A)

Acoustic power (L

WA

) 102.7 dB(A)

Uncertainty (K) 3 dB(A)

Vibration values

Impact drilling mode 15.238 m/s

2

Drilling into metal, a

h,D

4.98 m/s

2

Uncertainty (K) 1.5 m/s

2

Wear hearing protection.

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in

EN 60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

- using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

significantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns.

DESCRIPTION (FIG. A)

Your impact drill has been designed for drilling

holes in wood, metal and plastics and for hammer

drilling in brick and concrete.

1. On/off switch

2. Lock-on button

3. Speed adjustment wheel

4. Forward/reverse switch

5. Switch for drilling / hammer drilling

6. Chuck

7. Main grip

8. Auxiliary grip

9. Depth stop

10. Rear sleeve

11. Front sleeve

12. Power indicator light

Vērtējums

Vairāk par šo rokasgrāmatu

Mēs saprotam, ka ir patīkami, ka jūsu FERM PDM1052 Triecienurbis ir papīra rokasgrāmata. Jūs vienmēr varat lejupielādēt rokasgrāmatu no mūsu vietnes un pats to izdrukāt. Ja vēlaties saņemt oriģinālo rokasgrāmatu, iesakām sazināties ar FERM. Viņi varētu nodrošināt oriģinālu rokasgrāmatu. Vai meklējat sava FERM PDM1052 Triecienurbis rokasgrāmatu citā valodā? Izvēlieties vēlamo valodu mūsu mājaslapā un meklējiet modeļa numuru, lai redzētu, vai tas ir pieejams.

Specifikācijas

Visas rokasgrāmatas par FERM Triecienurbji
Citas Triecienurbji rokasgrāmatas

Bieži uzdotie jautājumi par FERM PDM1052 Triecienurbis

Mūsu atbalsta komanda meklē noderīgu informāciju par produktu un atbild uz bieži uzdotajiem jautājumiem. Ja atrodat ko nepareizu bieži uzdotajos jautājumos, informējiet mūs, izmantojot saziņas veidlapu.

Saistītie produkti

Rokasgrāmata

FERM PDM1051 Triecienurbis

Rokasgrāmata

FERM PDM1031 Triecienurbis

Rokasgrāmata

FERM PDM1004 Triecienurbis

Rokasgrāmata

FERM PDM1016 Triecienurbis

Rokasgrāmata

FERM PDM1027 Triecienurbis

Rokasgrāmata

FERM PDM1034 Triecienurbis

Rokasgrāmata

FERM PDM1005 Triecienurbis

Rokasgrāmata

FERM PDM1020 Triecienurbis

Saistītās kategorijas