
7
Subwoofer
• Connect the power cord to the AC IN socket of the subwoofer and
then into a mains socket.
Subwoofer pairing
Automatic pairing
The subwoofer and soundbar will pair automatically when both are
plugged into the mains supply. Connection is wireless, so there is no
need for any cables to connect the two units.
• When the subwoofer is connecting with the soundbar, the
indicator will ash.
• When the subwoofer is connected with the soundbar, the
Indicator will light up.
NOTE:
ū Only press the
button on the rear of the subwoofer if pairing
manually.
ū If the automatic pairing fails, pair the subwoofer with the soundbar
manually.
Manual pairing
1. Ensure that all the cables are securely connected and the soundbar
is in STANDBY.
2. Press and hold the
button on the rear of the subwoofer for
3 seconds. The subwoofer will enter pairing mode and the
Indicator will ash quickly.
3. Press the
button on the soundbar or on the remote control to
switch the system on.
4. Press the
button on the remote control, then press the or
button to highlight <WLPAIR>. Press and wait for 5 seconds.
5. When the subwoofer is paired with the soundbar, the
Indicator
will light up and the soundbar will display <PAIRED>.
6. If the
indicator ashes slowly, the wireless connection has failed
and the soundbar will display <SUB NC>.
Unplug the power cable from the subwoofer and then reconnect the
power cable after 4 minutes. Repeat steps 1 ~ 4.
NOTE:
ū If the wireless connection fails again, check if there is conict or strong
interference (for example, interference from an electronic device) around
your location. Remove these conicts or strong interferences and repeat
the above procedures.
Basic operation
Standby/ON
When you rst connect the soundbar and subwoofer to the mains
socket, the soundbar and subwoofer will be in STANDBY.
• Press the
button on the soundbar or on the remote control to
switch the system ON.
• Press the
button again to switch the system back to STANDBY.
• Disconnect the mains plug from the mains socket for both soundbar
and subwoofer if you want to switch the system OFF completely.
ū If a CEC enabled TV/external device is connected, the soundbar
will switch on automatically when the TV or the external device is
switched on.
ū When there is no input signal received by the soundbar in over 15
minutes, then the system will automatically go into STANDBY.
NOTE:
ū Your TV or external device needs to have CEC enabled if you want the
soundbar to turn on when you switch your TV or external device on.
ū CEC stands for Consumer Electronics Control and is a universal method
for dierent devices to communicate with one another.
ū See the MENU section for how to disable auto standby.
Select source modes
Press the button repeatedly on the soundbar or on the remote
control to select the HDMI HDMI eARC/ARC, HDMI 1, HDMI 2, USB,
AUX IN, BT or OPT source. The selected source will show on the
soundbar's display.
Adjust the volume
• Press the / buttons on the soundbar or on the remote
control to adjust the volume.
• If you wish to mute the sound, press the
button on the remote
control. Press the
button again or press the / buttons on the
soundbar or on the remote control to resume normal listening.
Select equaliser (EQ) effect
• While playing, press the button on the remote control to select
between preset equalisers: MUSIC, MOVIE, VOICE, GAME, SPORT,
NIGHT, CUSTOM or EQ OFF.
Adjust the bass / treble
You can adjust the bass and treble levels for the custom EQ setting.
Pressing the
/ or / will automatically switch the
soundbar to the custom EQ setting.
• Press the
/ button on the remote control to adjust bass
level.
• Press the
/ on the remote control to adjust treble level.
Bluetooth operation
Pair Bluetooth-enabled devices
The rst time you connect your Bluetooth device to this soundbar, you
need to pair your device to this soundbar.
1. With the soundbar power ON, press the
button on the soundbar
or the
button on the remote control to select the BLUETOOTH
source.
2. Activate your Bluetooth device and select the search mode. “SHARP
HT-SBW53121” or “SHARP HT-SBW55121” will appear on your
Bluetooth device list depending on your model.
3. Select “SHARP HT-SBW53121” or “SHARP HT-SBW55121” in your
Bluetooth pairing list. After successful pairing, the soundbar will
display <BT>.
4. Play music from the connected Bluetooth device. To disconnect the
Bluetooth function, you can:
ū Switch to another function on the soundbar.
ū Press and hold
on the soundbar or remote control.
TIPS:
ū The soundbar will also be disconnected when your device is moved
beyond the operational range.
ū If you want to reconnect your device to this soundbar, place it within the
operational range.
ū If the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the soundbar.
ū If the connection is lost, follow the instructions above to pair your device
to the soundbar again.
Listen to music from Bluetooth devices
• If the connected Bluetooth device supports Advanced Audio
Distribution Prole (A2DP), you can listen to the music stored on the
device through the soundbar.
Pievienoties sarunai par šo produktu
Šeit varat dalīties savās domās par Sharp HT-SBW53121(SL) Mājas kinozāles sistēma. Ja jums ir jautājumi, vispirms rūpīgi izlasiet rokasgrāmatu. Rokasgrāmatu var pieprasīt, izmantojot mūsu saziņas veidlapu.